by Akoma Pet Products | 400w Dog House Furnace with 10-Foot Cord | Installs in Minutes | Safe – Dry Heat | Won’t Burn Pets

Price: $129.95
(as of Oct 10, 2024 15:23:42 UTC – Details)

Product Description

SAFE, DRY HEAT

Internal heat shield keeps the front from getting hot, allowing your pet to lay directly against the lower half of the unit without any danger of getting burned. Quiet, forced-air fan disperses heat. Please follow installation instructions. Unit is made of 16-gauge powder-coated steel.

EASY THERMOSTAT ACCESS

The thermostat is easy to access and replaceable. Adjusts up to 100°F on high setting. Most people will typically set their thermostat just above medium. The heating temperature will depend upon the insulation and whether or not the dog has a door flap.

CHEW RESISTANT CORD

Hound Heater Deluxe comes equipped with a 6 ft, 3-prong grounded cord. Not only is it heavy-duty and chew-resistant, but it also has a protective stainless steel spring that covers the entire cord to relieve strain and eliminate cord tension problems. Uses standard home voltage: 120V 60Hz

About Us

Akoma Pet Products is here to support you and your pet.

Patented design with safety, simplicity and efficiency in mind

The Akoma Hound Heater Deluxe is the best choice to keep your dog safe, warm and comfortable this winter.

LONG LASTING: Hound Heater Deluxe lasts for years (100,000 on/off cycles) and is powered by a long-life 300W heating element. SAFE CONSTRUCTION: Features heavy duty chew-resistant cord and rounded corners for added safety. Internal heat shield protects all wires and components. SAVES ENERGY: Hound Heater Deluxe disperses safe, dry heat up to 75 feet and only runs when needed. SET IT & FORGET IT: Thermo sensing bulb allows for accurate control of the heat in your pet’s house. EASY TO INSTALL: Special mounting bracket allows the furnace to be mounted on igloo type houses.

INSTALLATION INSTRUCTIONS

Install your Hound Heater in 5 easy steps!

Drill a hole through the wall of the house.Feed the cord through the hole.Mount the Hound Heater on a vertical wall of your pet house. Do not mount on ceiling or floor. Place heater as high as possible with a minimum of 3 inches from the ceiling.Set the thermostat.Plug it in! If you are using an extension cord, it must be a 3 wire, 18 gauge (outdoor rated) grounded plug cord.

To disconnect heater, turn controls to off, and turn off power to heater circuit at main disconnect panel and remove plug from outlet.

Please read Hound Heater manual for full installation instructions.

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

3.9 out of 5 stars
555

4.3 out of 5 stars
1,763

4.3 out of 5 stars
91

3.9 out of 5 stars
67

Price

$135.95$135.95 $129.95$129.95 $145.96$145.96 $159.95$159.95

Watts – Heating
400W 300W 300W 150W

All Steel Construction

✓

✓

✓

✓

Dimensions
4 x 6.5 x 8 in 4 x 6.5 x 8 in 4 x 6.5 x 8 in 5 x 10 x 12 in

Weight
3.5lbs 3.5lbs 3.5lbs 5lbs

Cord Length
10 ft 10 ft 10 ft 6 ft

Igloo Style Mounting Bracket

✓

Heat & Cooling/Air Recirculation

✓

Chew-Resistant Cord

✓

✓

✓

✓

LONG LASTING: The Hound Heater Deluxe lasts for years (100,000 on/off cycles) and is powered by long-life 400W heating element. Just plug it into a 110v outlet, that’s it!
SAFE CONSTRUCTION: Features heavy-duty chew-resistant cord and rounded corners for added safety. An internal heat shield protects all wires and components.
SAVES ENERGY: Hound Heater Deluxe dispenses safe, dry heat up to 100 cubic feet and only runs when needed.
SET IT & FORGET IT: Thermostat control allows for accurate control of the heat in your pet’s house.
EASY TO INSTALL: The Hound Heater can be installed in minutes with four screws or bolts. A Special mounting bracket is available that allows the furnace to be mounted on igloo type houses.